Covering a wide range of industrial and automotive CAN applications, this is a powerful and economic solution for an active CAN board with two CAN channels. The interface is state-of-the-art and can be easily installed by Plug & Play. Some of the features offered by the on-board microcontroller include filtering, preprocessing, transmission and time stamped storage of CAN messages.

Due to the powerful microcontroller both CAN controllers can operate simultaneously without losing data even in systems with a high bus load. In combination with the VCI CAN driver, the iPC-I XC16/PCI provides seamless integration of PC supported CAN applications. In addition the iPC-I XC16/PCI is well-suited for use as a CANopen network controller.

Technical Data

• PCI-Bus interface (2.2), 32 Bit/33 MHz, 3.3 or 5 Volt
• PC address range - Plug & Play, 16 kB memory mapped and 128 bytes I/O area
• Interrupts - INT A, Plug & Play
• Microcontroller - Infineon XC161, 40 MHz
• Memory extension - 512 kByte SRAM, 128 kByte FLASH, 8 kByte DPRAM
• Internal TwinCAN module (two CAN channels)
• CAN bus interface - ISO/IS 11898-2 according to DS 102, optional: galvanic decoupling and/or high-/low-speed bus interface (ISO/IS 11898-3) switchable via software
• Power supply - 5 V DC, 100 mA typ.;3.3 V DC, 120 mA typ
• Temperature range: -20 ºC...+70 ºC
• Size - Apx 89 x 124 mm
  

Contents of delivery: PC/CAN interface card and user manual, IXXAT CAN driver VCI for Windows 2000/XP & miniMon a basic CAN monitor